Lawn Fawn Christmas Dogs Kit – A Paw-sitively Festive Collection

INSERT HERO IMAGE HERE

Lawn Fawn Christmas Dogs Kit projects featuring a festive slimline shaker card and two coordinating paw print gift tags in kraft, red, white and gold.

Today is release day for Lawn Fawn's brand-new Christmas Dogs Kit!


This adorable kit is all about festive fun with our four-legged friends, and I couldn't resist creating a little collection of Christmas projects with it. I've made a shaker card and two coordinating gift tags, which I'll be sharing with you in more detail below.

But first, let's take a closer look at what's included in the kit!

  • Christmas Dogs Stamp Set

  • Christmas Dogs Lawn Cuts

  • Christmas Dogs Coloring Stencils

  • Paw Print Gift Tag Lawn Cuts

  • Paw Print Gift Tag Sentiments: Christmas Stamp Set

  • Mistletoe Sequin Mix

  • Cut Length of Mistletoe Lawn Trimmings

  • Christmas Dog Vinyl Sticker


With so many lovely elements to mix and match, this kit offers plenty of possibilities for creating festive cards, gift tags and other little Christmas surprises. Now, let me show you what I've made with it!

About This Project

For my Christmas Dogs projects, I chose a festive colour palette of kraft, red, white and gold, with a few sparkly details to add a little extra Christmas magic.

A Paw-sitively Festive Slimline Shaker Card

I started by die-cutting a kraft cardstock panel using the Small Slimline with Lift the Flaps die set. I then used the new Paw Print Gift Tag die to create three paw-shaped openings, positioning each one at a slightly different angle for a playful look.

I backed the openings with vellum and added the decorative paw print outlines, die-cut from the Let It Shine Holiday Plaids patterned paper. I chose the beige design for the top and bottom paws and the red design for the centre, using the same patterned papers behind the openings to tie everything together.

To turn the card into a shaker, I created the shaker walls from several layers of sturdy white cardstock, cut to match the size of my slimline panel, with openings for the paw prints. I filled the shaker compartments with Tiny Treasures Iridescent Stars Confetti. The little stars are quite subtle behind the vellum, but they make such a lovely rustling sound when the card is shaken!

Next, I coloured three of the adorable dogs from the Christmas Dogs stamp set to match my chosen colour scheme and arranged them on the paw prints.

For the sentiment, I heat-embossed the outlined “Merry Christmas” greeting in gold, coloured the inside with a red Copic marker and cut it out using the coordinating die.

To finish the card, I added a gold mirror cardstock layer behind the kraft panel and mounted everything onto a white slimline card base, using the Large Slimline with Sliders die set for the white layer.

As a final little detail, I scattered some Tiny Treasures Snowflakes Confetti and selected red and clear sequins from the Mistletoe Sequin Mix across the card.

Two Coordinating Paw Print Gift Tags

Of course, I couldn't resist making a couple of matching gift tags using the new Paw Print Gift Tag dies!

For the first tag, I used some leftover beige patterned paper from my card and paired it with a kraft cardstock paw print detail. I backed the opening with vellum and heat-embossed the “A Treat for You” sentiment in gold.

I finished it with white ribbon and two little bells from my stash, along with some Gold Sparkle Single Cord from Lawn Fawn.

For the second tag, I used the leftover red patterned paper with a white paw print detail. This time, I turned the tag into a little shaker, using Lawn Fawn's heat-resistant acetate to create a clear window. I filled it with the red and clear sequins from the Mistletoe Sequin Mix and added the gold heat-embossed “Happy Pawlidays” sentiment.

A few more bells, some red ribbon and gold floss from my stash, together with Lawn Fawn's white hemp twine, completed the festive look.

I love how the two tags coordinate with the card while still having their own little details. They would look so sweet attached to Christmas presents!

A Little Extra: A Christmas Dog House Treat Box

I couldn't resist making one more little project to go with my Christmas Dogs collection! I used Lawn Fawn's Scalloped Treat Box together with the Scalloped Treat Box Dog House Add-On to create a festive little dog house.

Although the Dog House Add-On is no longer available, I wanted to share this idea for anyone who already has it in their collection. One of my favourite details is that the sentiments from the new Paw Print Gift Tag Sentiments: Christmas stamp set fit beautifully onto the bone-shaped tag included in the older die set!

For the dog house itself, I used white cardstock with white die-cut siding, a kraft-coloured trim along the bottom and a red plaid roof made from Let It Shine Holiday Plaids patterned paper. I added a dark brown door, a gold mirror cardstock bone above the entrance and a little red food bowl with two tiny bones die-cut from Vanilla Malt and Speckled Eggshell cardstock. I also decorated the food bowl with a tiny bow, using another die included in the Dog House Add-On.

For the matching tag, I heat-embossed the “A Treat for You” sentiment in gold onto vellum and layered it over a bone cut from the beige, gold-foiled plaid paper. I added another slightly offset bone cut from gold mirror cardstock for a little extra sparkle.

To finish everything off, I attached the tag with a wooden peg and decorated it with red gingham ribbon, red hemp twine, Gold Sparkle Single Cord and two tiny bells.

I think this little dog house would make such a sweet way to package a small Christmas treat, especially for a dog lover!

Tips & Tricks

How to Match Die-Cut Openings on Two Layers

When I was working on my slimline shaker card, I wasn't entirely happy with how the kraft cardstock panel looked. So I thought about covering it with another cardstock layer instead. But there was one little problem: I'd already die-cut the three paw-shaped openings and attached the vellum, so I needed a way to recreate those openings in exactly the same positions on the new panel.

After giving it a little thought, I came up with a simple trick using ordinary printer paper and some washi tape!

  1. Cut a strip of printer paper that's slightly taller than your die and fairly long, then fold it in half. Die-cut your chosen shape through both layers, making sure to position the die well away from the folded edge. This is important because you'll need enough room to fold the template over your new cardstock panel, even when the openings are positioned at an angle.

  2. Open the folded paper and position the opening on one half directly over the corresponding die-cut opening in your original panel. Secure it temporarily with washi tape.

  3. Place your new, uncut cardstock panel in exactly the right position over the original panel.

  4. Fold the other half of your paper template over onto the new panel and secure it with washi tape.

  5. Carefully release the template from the original panel. You can now use the opening in your paper template as a guide to position your die on the new cardstock panel.

  6. Die-cut the opening and repeat the process for any remaining shapes.

A little tip: Don't cut your template opening too close to the fold! I made that mistake on my first attempt and couldn't fold the template over properly because the folded edge ended up between the two cardstock layers.

The trick worked beautifully! In the end, I decided to keep my original kraft panel without the extra layer, but I thought this little technique was too useful not to share.

It's a handy way to line up die-cut openings on layered cards, especially when the original panel is already decorated or difficult to run through your die-cutting machine again.

Supplies

Advertisement & Affiliate Disclosure This project was created as part of the Lawn Fawn Design Team. Some of the products featured in this post were provided by Lawn Fawn, and I receive compensation as a Design Team member.
All opinions expressed are entirely my own.
Some of the links below are affiliate links. If you purchase through one of these links, I may earn a small commission at no additional cost to you. I truly appreciate your support!

Supplies

Advertisement & Affiliate Disclosure This project was created as part of the Lawn Fawn Design Team. Some of the products featured in this post were provided by Lawn Fawn, and I receive compensation as a Design Team member.
All opinions expressed are entirely my own.
Some of the links below are affiliate links. If you purchase through one of these links, I may earn a small commission at no additional cost to you. I truly appreciate your support!

Stamps (plus coordinating dies)

Dies

Other

Supplies for the Dog House Treat Box


Let’s Make Something Cute!

Thank you so much for visiting Projekt Cupcake today. I hope this project has inspired you to create something sweet of your own. Happy crafting!

Love
Jennifer

Let's Connect

Whether you have a question, feedback, or just want to say hello, I'd love to hear from you.

Feel free to leave a comment below or contact me via email ( ) or Instagram ( ).
I'm always happy to help.

Comments

Jeanne said…
Thank you so much for sharing these wonderful projects including the dog house box! And for the tips you share to make our crafting easier. You are the best!