Fawny Holiday Week - Sea-son's Greetings Push & Pull Shadowbox Card

INSERT HERO IMAGE HERE

Handmade underwater Christmas card featuring a Season’s Greetings sentiment, sea critters wearing Santa hats, seaweed and festive details.

Hello everyone!

It's Fawny Holiday Week over at Lawn Fawn, and I'm so excited to be part of it this year!

Fawny Holiday Week has always been one of my favourite weeks on the Lawn Fawn blog. I've always loved seeing all the wonderful Christmas projects created by the Design Team, so being able to join in and share my own festive inspiration this year makes it even more special!

For today's project, I've created a Season's Greetings Push & Pull Shadow Box Card with a fun underwater Christmas scene. My little fish, crab and jellyfish are all dressed up in their Christmas hats and ready to celebrate the holidays!

Thanks to the interactive Push & Pull mechanism, the fish and jellyfish can swim through the underwater scene. I'll show you how I created the mechanism and explain how it works in the Tips & Tricks section further down.

Be sure to visit the Lawn Fawn blog for even more festive inspiration and this week's giveaways.

Now, let's take a closer look at my card!

About This Project

One of the things I love about Lawn Fawn's Fawny Holiday Week is the opportunity to revisit some older favourites and combine them with other supplies to create something new!

I hadn't used the adorable Christmas Fishes stamp set in quite a while, and I thought it was about time to give these little underwater friends some love again. They turned out to be the perfect choice for a fun interactive card I've decided to call a Push & Pull Shadowbox Card!

The idea behind this card is to make the characters move when you push or pull the tabs on either side of the shadowbox. This works particularly well with images that can fly or swim, as they appear to move freely through the scene. So what could be more fitting than a couple of Christmas fish and a little jellyfish wiggling around underwater?

Most of the adorable underwater characters are from Christmas Fishes. I combined them with seaweed, coral, rocks and other little details from Fintastic Friends, Critters in the Sea, Ocean Shell-fie and You Are Sublime to create a colourful underwater Christmas scene.

For the background, I used Tim Holtz Distress Watercolor Cardstock and Tattered Rose Distress Ink. I applied some ink directly to my glass mat, spritzed it with water and dipped the cardstock into it to create a soft, slightly textured watercolour effect.

One of my favourite details is the large Season's Greetings sentiment in the background. I die-cut the entire sentiment from gold metallic cardstock using the Giant Season's Greetings die. I then die-cut the sentiment a second time from gold sparkle cardstock, trimmed away everything except the first three letters, SEA, and layered that piece directly over the matching part of the original sentiment. This highlights the word sea within season's – a playful little nod to the underwater theme!

I also added the sweet “Fish You Merry Christmas” sentiment, heat-embossed in gold on a banner from the Double Slider Surprise die set. The banner happened to be just the right size for the greeting!

To finish the front of the card, I added a little crab, some seaweed, coral, a rock and a tiny Christmas present around the oval opening. I love how all these little details frame the scene without hiding the moving characters inside.

And the best part? Give the tabs a little push or pull, and the fish and jellyfish start to wiggle!

Another great thing about this card is that it folds flat to fit inside a standard A2 envelope, making it easy to send in the post!

Tips & Tricks

The Basics – No Special Dies Needed!

One great thing about this type of shadowbox card is that you don't need any special dies to create the basic structure! I first came across this clever way of constructing a shadowbox in a tutorial by Jennifer McGuire, and it's such a versatile technique.

You can make a Push & Pull Shadowbox Card in practically any size you like, whether it's portrait, landscape, slimline or something completely different.

Simply start with your desired card dimensions and add some extra cardstock to both sides for the folding tabs. For my card, I used two ½-inch sections on each side, so I added 1 inch to both the left and right edges of my card panels.

You can easily adjust these measurements to suit your project. Wider tabs create a deeper shadowbox and allow for a greater range of movement, while narrower tabs give you a shallower card with less movement.

And if you'd rather use a die-cut panel for the front, that's possible too! Instead of cutting everything from one piece, you can simply attach separate folded tabs to the sides of your panel.

You'll also need a few narrow strips of sturdy acetate or cardstock to attach your moving elements. These strips connect the images to the outer tabs, allowing them to move when you push or pull the sides.

The window on the front can be almost any shape you like, too. Just choose an opening that works with your design and gives the moving elements enough room to be seen.

Preparing the Card Panels

For my underwater Christmas card, I started with two pieces of 110 lb. white cardstock, each measuring 7½ × 4¼ inches.

The centre section measures 5½ × 4¼ inches, with an additional inch on each side for the folding tabs.

I scored both pieces at ½ inch and 1 inch from each side and folded the score lines in alternating directions to create a zigzag fold. I also rounded the outer corners of the tabs with a corner rounder.

One piece forms the back of the shadowbox, while the other becomes the front panel with the window.

Creating the Oval Window

For the opening in the front panel, I used the Secret Garden Window die. This die normally creates an arch with a straight bottom edge, but I wanted an elongated oval with rounded ends.

To achieve this, I used partial die-cutting. I first cut one side of the opening, then rotated the die 180 degrees and partially die-cut the opposite side. This gave me an oval-shaped window with the lovely dotted detail around the edge.

The size of your window can make quite a difference to the stability of the front panel. The larger the opening, the less cardstock remains to support it, so the front may start to bow slightly when you push or pull the tabs. This can actually be a lovely effect if you want a more rounded, dimensional look!

However, if you'd prefer the front to stay flat, I recommend reinforcing it. One option is to adhere a piece of sturdy acetate behind the entire front panel. Alternatively, you can add one or two extra layers of cardstock with the same window cut into them.

That's what I did for my card! I cut an additional piece of cardstock slightly smaller than the 5½ × 4¼-inch front panel, die-cut the same oval opening and adhered it to the back of the front panel. This gave the window frame a little more strength and helped prevent it from bending when the tabs were pushed or pulled.

Creating the Background

For the background, I used Tim Holtz Distress Watercolor Cardstock and Tattered Rose Distress Ink.

I applied some ink directly to my glass mat, spritzed it with water and dipped the cardstock into the mixture to create a soft watercolour effect.

Once the background was dry, I arranged and adhered the stamped images and the large gold sentiment. I then attached the finished background to the centre of the back panel.

Adding the Moving Elements

Now for the fun part – making the fish and jellyfish move!

I cut a few strips of sturdy acetate, approximately ½ inch wide, and attached them to the outermost folded sections of the back panel, not the inner ones.

I used one strip on the left and two on the right, attaching the stamped and coloured characters to the acetate.

The exact placement depends on your images and how far you want them to move. I experimented with the height and length of each strip until I was happy with the arrangement.

One important tip: Test the movement before assembling the card! Make sure the characters can move freely without catching on the window or the other decorations.

Assembling the Shadowbox

Once all the moving elements were in place, I joined the front and back panels by adhering only the outermost tabs on each side.

This creates the shadowbox structure while keeping the sides flexible enough to push and pull.

Finally, I decorated the front with a little crab, some seaweed, coral, a rock, a tiny Christmas present and the gold-embossed sentiment banner.

And there you have it – a Push & Pull Shadowbox Card with little underwater friends that move when you push or pull the tabs!

Supplies

Advertisement & Affiliate Disclosure This project was created as part of the Lawn Fawn Design Team. Some of the products featured in this post were provided by Lawn Fawn, and I receive compensation as a Design Team member.
All opinions expressed are entirely my own.
Some of the links below are affiliate links. If you purchase through one of these links, I may earn a small commission at no additional cost to you. I truly appreciate your support!

Let’s Make Something Cute!

Thank you so much for visiting Projekt Cupcake today. I hope this project has inspired you to create something sweet of your own. Happy crafting!

Love
Jennifer

Let's Connect

Whether you have a question, feedback, or just want to say hello, I'd love to hear from you.

Feel free to leave a comment below or contact me via email ( ) or Instagram ( ).
I'm always happy to help.

Comments

Jeanne said…
Wonderful project, Jennifer. I'm so happy for you to have a larger audience to share your creativity. Love this push/pull fishy Christmas card!